Bernese Mountain Dog Clipper Set - Cordless

Bernese Mountain Dog Cordless Clipper Set

This set has been designed to give you the necessary equipment to clip your dog at home. It includes the popular Masterclip MD Roamer dog clipper along with 2 premium toughened steel blades that are best suited for the Bernese Mountain Dog.

• Masterclip MD Roamer cordless A5 dog clipper 
• Comes with 2 rechargeable li-ion batteries & battery charger
• Charge time: approximately 1 hour
• Run time: approximately 2 hours (dependent on coat type & cleanliness)
• Batteries stored neatly in the handset with no trailing cables
• 10 blade = 1.5mm finishing blade; ideal for face, feet & back end for sanitation purposes
• 4 skip tooth blade = 9mm thinning blade
  
• Fast 5000 spm cutting speed
• Easy to use snap on/snap off blades
• A very easy clipper to use with a non-slip rubberised handle, weighs only 560g
• Compatible with a large selection of metal comb guides 
• Comes in a smart aluminium style carry case
• 2 YEAR WARRANTY
• FREE next working day delivery (on orders received by 1pm)

Before clipping, always make sure that your dog is washed and thoroughly dried. All tangles and matted areas must be brushed through to allow the clippers to glide through the hair.

Teeth on the skip tooth blades are set further apart to help feed the hair into the cutter, so great care must be taken when using these blades. Ensure that the blade is always held flat and runs with the contour of the coat and never at an angle whilst clipping. More information on different blade types can be found below. 

An alternative to skip tooth blades are our metal comb guide attachments which fit over the 10/10F blade and can be purchased additionally. 

The Andis blade coolant and disinfectant spray is an excellent way of keeping your blades cool whilst clipping. Not only is it a blade coolant, it is also a lubricant, disinfectant, blade cleaner and rust preventative which all help to reduce friction when clipping.

Clipper Blade Information: Full Tooth vs Skip Tooth Blades

Skip Tooth Blades are used for rough cutting

• Wider teeth to help feed a thick coat into the clipper blade
• Excellent for coat thinning or blending, leaves a natural look
• Suitable for all terriers and dogs with wiry or unruly coats

F Blades are for coat finishing

• Full row of even teeth
• Ideal for a sharp show finish
• Good to use after skip tooth blade

Breeds with heavy coats are quite susceptible to mats and tangles. Their continually shedding coat requires frequent brushing to help keep the coat tangle free. These breeds usually do not require clipping on the main body as the coat not only provides insulation in colder weather, but also helps to keep them cool in warmer weather. If you wish to clip your dog, use the clippers to trim excess fur off the dog's body. Trim around the tail, paws, sanitary areas and chest if needed, going with the fall of the fur. 

The 4 skip tooth blade is ideal to use on the belly and legs and the 10 blade is useful for chipping away under matted areas and also around the face, feet and pads. Once a week use a slicker brush to remove the loose hair from the coat and a metal comb to detangle paying particular attention to longer hairs around the neck and the hind legs. A coat rake is useful to remove loose hair during moulting and thinning scissors help tidy stray and wispy hairs.

• Motor: 30W
• Cutting speed: 5000 spm
• Decibel rating: 60 dB
• Comes with 2 rechargeable li-ion batteries & battery charger
• Each battery: 3 x 3.6 V Li-ion: 12V
• Charge time: approximately 1 hour
• Run time: approximately 2 hours (dependant on coat type & cleanliness)
• Weight: 560g (including battery & blade)