Frug Clipper set - Cordless Pro

Masterclip PRO Cordless Frug Dog Clipper Set

The Masterclip PRO Cordless Frug Clipper Set has been selected to support occasional grooming requirements of the Frug, a French Bulldog and Pug cross. Supplied with three high-quality professional Japanese Steel A5 blades – a #10F blade, a #7F blade and a #5F blade – this versatile grooming package offers a choice of cutting lengths for specific hygiene requirements, veterinary preparation under professional guidance and occasional clipping where appropriate.

The #10F blade leaves approximately 1.5mm of coat and is suitable for close, precise clipping where needed. It can be used for targeted hygiene trimming where there is sufficient hair to warrant clipping. Particular care is required around sensitive skin, skin folds and paw pads. Clipping for veterinary procedures should be carried out as directed by a veterinary professional.

The Frug typically has a short, smooth coat, although coat density and texture can vary between individual dogs. Most Frugs require very little trimming and benefit instead from regular brushing with a soft grooming brush or rubber grooming mitt to remove loose hair and maintain a healthy-looking shine. Grooming should always be gentle, particularly around sensitive skin and facial wrinkles.

Routine care should also include checking the ears, inspecting the paw pads, keeping the nails neatly trimmed and maintaining clean, dry skin folds where present. Facial folds should be cleaned gently using an appropriate method recommended by your vet, with care taken to dry them thoroughly. Clippers should not be used inside wrinkles or close to the eyes, nose or lips.

Frugs do not normally require full-body clipping. Their natural coat helps protect the skin, and clipping should generally be reserved for veterinary treatment, specific hygiene needs or small areas that require attention. Shaving is not a substitute for keeping your dog cool and comfortable in warm weather.

The #7F blade leaves approximately 3.2mm of coat and offers a closer finish where clipping is appropriate. The #5F blade leaves approximately 6.4mm, providing a slightly fuller finish where additional coat coverage is preferred. As many Frugs naturally have very short coats, these blades should only be used where there is sufficient coat length to justify clipping. They are not intended for routine full-body grooming of a healthy Frug.

The fine-tooth finish blades are designed to produce a smooth, even clip on suitable coat types and lengths. For the best results, the coat should be clean, completely dry and free from dirt or loose hair before clipping. Particular care should be taken around loose skin, prominent bones and sensitive areas. Check blade temperature frequently during use and stop if your dog shows signs of discomfort.

Regular brushing, gentle bathing when necessary, appropriate skin-fold care and nail maintenance are generally sufficient to keep a Frug looking its best. Keep grooming sessions short and comfortable, allowing breaks as needed.

The combination of the #5F and #7F blades offers additional versatility for occasional clipping applications where appropriate. Together with the precision #10F blade, this set provides a practical selection of cutting lengths for targeted grooming tasks. For most Frugs, however, routine coat care is best achieved through gentle brushing rather than clipping.

Built for reliability and everyday performance, the Masterclip PRO Cordless is a powerful rechargeable dog clipper designed for professional groomers and home users alike. Its high-performance motor delivers smooth, consistent clipping performance on suitable coats. The cordless design provides freedom of movement, whilst the slim ergonomic body ensures comfortable handling. The detachable A5 blade system allows for quick and effortless blade changes, enabling you to adapt your clipping setup as required.

Whether you're maintaining a family pet or grooming multiple dogs, the Masterclip PRO Cordless offers power, precision and versatility for appropriate clipping tasks.

Key Features

• Professional-grade cordless dog clipper designed for regular grooming
• Powerful rechargeable motor for smooth, consistent clipping performance
• Detachable A5 snap-on/snap-off blade system
• Includes a #10F PRO Japanese Steel Blade (1.5mm)
• Includes a #7F PRO Japanese Steel Blade (3.2mm)
• Includes a #5F PRO Japanese Steel Blade (6.4mm)
• Ideal for Frugs and other short-haired, smooth-coated breeds where clipping is required
• Suitable for hygiene trimming, veterinary preparation and occasional clipping where required
• Fine-tooth finish blades produce a smooth, professional-quality finish
• Ergonomic design for comfortable handling
• Trusted by professional groomers and home users
• Robust, reliable construction built for long-term use

As part of the Masterclip family, the PRO Cordless continues our commitment to providing professional grooming equipment that combines performance, reliability and exceptional value.